Wait for elevator to stop

Click the elevator panel to open door

Go to the end of the corridor, enter the your work station (the door with the green light!!)

Check the computer in your station

Cross reference the subject data with the sedate deck

Enter the correct value in the sedation system and flip the switch

Find the drill (should be right behind the heavy-duty door)

Open the port on the drill, put an empty canister inside, close the port

Seal the heavy-duty door

Activate the drill to start extraction sequence (remember to sedate the test subject first)

In case of drill head break, interact with the broken drill head to remove, replace it with the spare head from the rack

*SEDATION AND DRILL ONLY WORK WHEN THE CHAMBER IS SEALED*

After the drill sequence is finished, remove the filled canister

Load the filled canister into the Analyzer in the middle of your station

Load a floppy disk into the Analyzer, and click start

After the Analyzer is finished, take the copied disk and load it into your computer

Submit your work

The entrance door will be opened (with the green light!!), now you can leave your station and get ready for the next shift

Congratulations, you have reached the end of the special training guide

! WORK EFFICIENTLY !